Plastic mould parts factory teaches you the way to prevent rusting of ejector pins
Release time:
2020-07-10 14:53
It is well known that ejector pins are very prone to rusting. When a plastic mould parts factory finds a rusty ejector pin, if it is not treated, its service life will be quickly depleted and it will become less durable. So what should a plastic mould parts factory do when a thimble rusts? What is the right thing to do?
1. Plastic mould parts factory in the production of plastic moulds when the thimble rust a large part of the reason is the injection of water, the machine stops running off the water is impossible, improper operation is easy to cause the thimble rust, the correct method should be to turn off the water off the machine, so it can effectively prevent rust.
2. If the thimble is used correctly, it will be difficult to rust. When the thimble is out of use, we should also take measures to protect the thimble and use anti-rust oil or machine oil for rust prevention.
3. If the ejector pin of a plastic mould parts factory is rusty, when there is only a small amount of rust, you can remove the rust by brass wire or grinding stone processing. However, if the rust is serious, replace the thimble with a new one in time to keep your mould in good working condition.
Next page
Other Dynamics
Steadily Moving Forward: Second Week of Work
In the new year, the market competition remains intense. Motor energy efficiency upgrades, cost control, delivery cycles... every challenge requires close collaboration between upstream and downstream partners. At Chuangxin Kai Motor Co., Ltd., we firmly believe that only by perfecting every component can we achieve the outstanding performance of our customers' motors. In the second week of work, we are already ready. If you are looking for a reliable supplier of motor accessories, if you have a new project that requires prototyping, or if you want to find a partner for long-term and stable cooperation Welcome to contact us, and you are also welcome to visit our factory for an on-site inspection. Take a look at our workshop, take a look at our products, and take a look at our team of dedicated manufacturers.
Contact Information
Address: No. 7 Chuangxin Road, Luoyang Town, Changzhou City